World: r3wp
[!AltME] Discussion about AltME
older newer | first last |
JaimeVargas 21-Feb-2005 [329] | I don't think having OLA(s) is very useful for posting. It is great in when a conversation is going on. Like a year ago when we were all working towards a new view, and Carl use the OLA to reply. But for general postings it doesn't make any sense. IMHO. |
Graham 21-Feb-2005 [330] | while I've got your attention .. how does one interpret this .. ip/24 or ip/32 ? |
JaimeVargas 21-Feb-2005 [331x2] | ip/prefix prefix stands for the number of bits that are set to one in the network. It is a way to partition the address space. |
ie. 10.10.10.0/24 is referreing to any valid ip-address in the range 10.10.10.0 to 10.10.10.255 | |
Graham 21-Feb-2005 [333] | what does /32 do then? |
JaimeVargas 21-Feb-2005 [334] | 10.10.10.5/32 referes only to the ip-address 10.10.10.5 it is a host ip-address not a range for a network |
Graham 21-Feb-2005 [335x2] | ok. |
I was just reading in the squid docs that I need to specify for a single ip address .. ip/32 | |
JaimeVargas 21-Feb-2005 [337x2] | ;ip address are 32 bits. So when you do a mask comparison 10.10.10.5 and 255.255.255.255 == 10.10.10.5 |
;while 10.10.10.5 and 255.255.255.0 == 10.10.10.0 | |
Graham 21-Feb-2005 [339] | ok, I guess I need to read up a bit about this to understand it better. |
JaimeVargas 21-Feb-2005 [340] | ; in general 10.10.10.x and 255.255.255.0 == 10.10.10.0 ; where 0 <= x <= 255 |
DideC 21-Feb-2005 [341] | Are you the G dot ? ;-) |
JaimeVargas 21-Feb-2005 [342x3] | That is the reason that 10.10.10.5 and 10.10.10.15 are on the same subnet. |
255.255.255.0 corresponds to a 24 prefix in CIDR notation. | |
255.255.255.0 is what used to be know a Class C mask | |
eFishAnt 27-Feb-2005 [345] | mr R: after WNS was restored, I had to reboot my world to allow people to log back in. Sent feedback. |
[unknown: 9] 28-Feb-2005 [346] | Ah, interesting. thanks. |
Colin 28-Feb-2005 [347] | I had to reboot my world too as it wouldnt accept my logon/password until I did. Never happened before. |
Graham 28-Feb-2005 [348] | usually happens to me .. that I have to reboot after a failure of the name server |
Brock 28-Feb-2005 [349] | When you guys say you 'rebooted' your worlds, do you mean, actually recreate them? That's what I had to do as the world names hadn't been used as far as the AltME World Lookup Server was concerned. My three worlds (used only lightly) all needed to be restarted in the order they were originally created to claim the same IP addresses inorder to function properly. |
Tomc 28-Feb-2005 [350x2] | I think world names can expire after 10 days of disuse, so if light use means taking a couple of weeks off |
they may have just expired | |
Colin 28-Feb-2005 [352] | No - I had to shutdown the world and then restart it. |
Graham 28-Feb-2005 [353] | just restart them .. |
Brock 28-Feb-2005 [354x2] | Tomc, two of them are used every week, one of them daily just not alot of users. One time all my worlds did the very same thing without an World Server problem. |
I did restart them, just if you have multiple the world server seems to reactivate the unstarted world and the port is remembered, so you have to recreate them in the same order. | |
[unknown: 9] 28-Feb-2005 [356] | Have you clearly documented this in a FEEDBACK post? |
Brock 28-Feb-2005 [357x2] | Might be useful to have in the user guide. |
I believe I did when this happened before Reichart. You guys didn't find anything at your end to explain it. | |
[unknown: 9] 28-Feb-2005 [359x3] | Ah. |
Odd. | |
There are soooooooooooooo many subtle issues with the web. I'm playing with an internet camera right now, I get such odd results from it. | |
Ashley 1-Mar-2005 [362] | OK, I know we've covered this before but how do I remove myself from a group (Christianity in this case). This is what I tried: 1. Right click the group 2. Click on my username on the right hand side and observe it move to the left ... so far so good 3. Click save and get a dialog that says, "You must include yourself in the group." 4. Cancel to dismiss the dialog (I figure "Delete" is asking for trouble at this stage) ;) ??? |
Ammon 1-Mar-2005 [363] | Right click self, uncheck Christianity |
BrianW 1-Mar-2005 [364] | I do that, and click "Save". Each time I open the self profile, though, the group is checked again. |
Graham 1-Mar-2005 [365] | you need to log off and on again for this to work |
BrianW 1-Mar-2005 [366x2] | ohh. |
That was the missing step, thanks. | |
Graham 1-Mar-2005 [368] | I've only asked the same question myself 3x so far :) |
Tomc 1-Mar-2005 [369] | it is a usability issue |
[unknown: 9] 1-Mar-2005 [370] | Actually, this one is a bug + we can improve the UI, and will fix, and will improve. |
BrianW 1-Mar-2005 [371] | keep up the good work, the more I use it the more I enjoy it :-) |
Ashley 1-Mar-2005 [372] | Works like a charm (and quick too). |
Gregg 2-Mar-2005 [373] | R: Something like an "Ignore this group" button maybe? |
[unknown: 9] 3-Mar-2005 [374] | Yup. |
yeksoon 3-Mar-2005 [375] | for 3 consecutive days, I have experience recycle bug in AltMe. Are there anything specific that causes this? |
Sunanda 3-Mar-2005 [376] | Causes may include clicking before the resync has completed. But it also seems to be related to the size of the world -- I've been getting the recycle bug in the last few days, so possibly Rebol3 is getting too large. |
Tomc 3-Mar-2005 [377] | I recently got the recycle bug on a single group of a small world (repeatdly ) untill someone else posted to that group. (note my client was running on the same machine the world was running on) |
[unknown: 9] 3-Mar-2005 [378] | Yeksoon, yes, something in Rebol from what we can tell. I'm not quick to blame Rebol actually, but we have talked about this one with Carl, and on our next big update (which has a large rewrite in it) this bug WILL be gone. |
older newer | first last |