AltME groups: search

Yes, I have NAT at home as well. No chance to change it. Do I just 
enter my "local" IP adress? Doesn't seem to make sense to me.

I can change it, I did so for Azureus for e.g., but it requires me 
to enter local network IP. But what if I want to have two users using 
Chord? How do I tell the NAT which computer it should contact on 
2222 port? Or should I use different port for each user?

today you enter a secretary office there is windows XP  every where 
you enter a publisher/graphist maker you have apple every where? 
As there is less publisher than secretary  this explain as a short 
cut why there is sutch difference. When you enter a astronom office 
you have sun Sparc every where. As you get less astronom than plublisher 
you understand the difference betwin Apple and Sun :). Some people 
needs simplicity of use others need fiability of use. Then you have 
the rounding industry those building the sourrounded technologies 
in all cases they need to sell a lot this explain for example why 
a comon SONY MP3 sevice came with drivers to plug it to a PC equiped 
with windows and why they not giving apps and drvers to handle it 
under linux and unix.

I liked idea of a an ongoing weekly comp.. like back in 1999 http://web.archive.org/web/19991013041056/rebol.com/contest.html
. Haven't found the how to enter page though.

hm, my version works just with enter, but never mind:-)

Is anyone else using 1.2.9 and seeing their Send mode (enter or ctrl+s) 
stuck, so you can't change it? I can click the button, but it won't 
chagne the setting.

(Plus it changed my ctrl+s to send into enter to send)
I just reset that to how I want it :-)

somehow, I find that everytime the CTRL-S option is reset (which 
happens every now and then), I loose 5-10 minutes tring to put it 
back, looking in my options and trying to remember where that option 
is setup.. the pencil icon just has no relevance to the option and 
find that its easily forgotten... why not just use the CTRL-S or 
ENTER text itself as the toggle button?

I have reported the Linux link clicking and cut & paste via feedback.


I'm not sure about the scrolling --- so forgive me if I enter it 
again.

sorry... already found it:

To change your password, just right click on your name in the user 
list. Enter your new password, then confirm your password by entering 
it again in the popup. Your password will be changed.

I now have a zillion red groups.

Plus a lot of wrong settings (like the last two pressed of enter 
transmitted the line)


But I do have a dozen or so groups with messages I'd never seen from 
up to two months ago.....It was drastic but it has fixed the resync 
bug for me, at least for a while.

I am getting an error after 1) download altme to new PC; accept updates; 
 enter Rebol3 world;

As you can see, I was having trouble as this new install populated 
lists: any time that I hit the enter key the post vanished but the 
list would not refresh by just going to another topic and returning 
to this altme topic.  Hence the 3 stutters in trying to report what 
may be a known issue as I was not sure if my post was in limbo or 
lost in the ethereal bit bucket

i have problems, Altme is trying to load things but is disconnected 
before it's finished so that it enter in a enternal loop, trying 
to reload same things each times.

Reichart - and as for abbhorent behaviour. Interesting thing is, 
that ppl I work with, are never facing anything abhorrent. Some ppl 
(is it US specific?) are not used to "pressure" or how to call it. 
E.g. we are here in CZ used to look into one's eyes, ask private 
questions, whereas I believe in US it would not be appropriate, because 
you enter someone's "private zone". When few of us from CZ were at 
yoga training camp, we asked them some questions, and they felt offended, 
that we don't have right to ask for anything which could be regarded 
being a private matter. It took some time for them to understand 
it. One manager which taught me once told me - you can be harsh, 
you can fight - but don't fight ppl, fight arguments. And when I 
said that I regard something a blatant lie, it has nothing to do 
with you personally ...

goto START -> RUN -> and type in Eventvwr.msc  and hit enter to see 
what your event logs are recording.

you was able to set mode to the channel like every one can enter 
but they can't speak by default if they want to speak the cannle 
operation (the owner and his granted friends ) have to give you the 
right to speak (/mode usernickname +V or -v to shut him up lol)

yeah and even channels were not persistant so anyone could enter 
your channel and become the channel operator ( the first in joining 
a not already existing channel is set automatically chan operator)

you open a channel you create an object in memory that knows what 
client have enter every time some one join you channel it enter into 
the memory list

Yes, it presents an interesting problem... to enter a large world 
like this with so many prior messages.

for example, I just discovered that the "enter/return" key is not 
trapped within fields (so by extension isn't sent to the plugin) 
within Internet Explorer.  This specific case is not an issue within 
firefox... but then, neither receive scroll-wheel events... and others 
have posted that the alt+ctrl+shift keys are not detected, and there 
are other event issues too IIRC.

this is quite serious IMHO.

ah... "enter" key... yes  for sure.

I can't be sure... as I'm no flash expert, but my gut feeling is 
that since actual controls do receive the events... object controls 
should also be able to receive them ... I posted the bug mainly to 
make sure the enter key isn't forgotten... cause that is quite weird.

Gabriele, could a captcha be added easily and timely to RAMBO... 
as well as a "preview" step... hitting the "enter" is easy to do 
involuntarily.

did you re-enter it?

O.K.
Thanks to everyone for their help.

I offer my final (not that it's the best) rendition of these conversion 
functions.


to-unix-time: func [
  "Create unix-timestamp.  Author: Gabriele_3-Aug-2002."
  date [date!] "Rebol-format date. (non-Milisecond type)."
][
  date/date - 1-1-1970 * 86400 + to-integer date/time
]

from-unix-time: func [

  "Create rebol-timestamp from unix-timestamp.  Author: Rebolers-Altme_2005."
  utime [integer!] "Unix timestamp."
][
  unixTimestampConstant + to-time utime
]  

-- OR an all-in-one --

unixTimestamp: func [

  "Rebol date to/from unix timestamp conversion.  Authors: Many rebolers.."

  varIn "Enter either a Date!type or Integer!type to convert to/from 
  unix/rebol."
][

   unixTimestampConstant: 1970-01-01/00:00:00           ;Reference.
   varOut: "ERR"

   if ((type? varIn) = date!) [                         ;from rebol, 
   to unix.

     varOut: varIn/date - 1-1-1970 * 86400 + to-integer varIn/time
   ]

   if ((type? varIn) = integer!) [                      ;from unix to 
   rebol.

     if (varIn >= 0) [                                  ;B.U.  (before 
     Unix.)
       varOut: unixTimestampConstant + to-time utime
     ]
   ]
   return varOut
]

John.

BIG TYPO on the last post.. 

unixTimestamp: func [

  "Rebol date to/from unix timestamp conversion.  Authors: Many rebolers.."

  varIn "Enter either a Date!type or Integer!type to convert to/from 
  unix/rebol."
][

   unixTimestampConstant: 1970-01-01/00:00:00           ;Reference.
   varOut: "ERR"

   if ((type? varIn) = date!) [                         ;from rebol, 
   to unix.

     varOut: varIn/date - 1-1-1970 * 86400 + to-integer varIn/time
   ]

   if ((type? varIn) = integer!) [                      ;from unix to 
   rebol.

     if (varIn >= 0) [                                  ;B.U.  (before 
     Unix.)
       varOut: unixTimestampConstant + to-time varIn
     ]
   ]
   return varOut
]

John.
BIG TYPO on the last post.. 

unixTimestamp: func [

  "Rebol date to/from unix timestamp conversion.  Authors: Many rebolers.."

  varIn "Enter either a Date!type or Integer!type to convert to/from 
  unix/rebol."
][

   unixTimestampConstant: 1970-01-01/00:00:00           ;Reference.
   varOut: "ERR"

   if ((type? varIn) = date!) [                         ;from rebol, 
   to unix.

     varOut: varIn/date - 1-1-1970 * 86400 + to-integer varIn/time
   ]

   if ((type? varIn) = integer!) [                      ;from unix to 
   rebol.

     if (varIn >= 0) [                                  ;B.U.  (before 
     Unix.)
       varOut: unixTimestampConstant + to-time varIn
     ]
   ]
   return varOut
]

John.

It is like doing 3 * 7 = 21 on calculator, then pressing /, 7, enter, 
and not getting back to 3!

Since we don't have control over the field .. users will enter 2 
digits sometimes

i mean user can enter 2025 explicitely. that gets 1925.

I would require users to enter four digits. Get them used to being 
precise.

I mean - someone has incorrectly installed rebol and runs scripts 
by pressing enter in Total commander :-)

Maybe I should put that into a view pane and enter it into the contest?

Are the users going to enter such an array as above?

Ammon, regarding your drop-down style.  Is it possible to also allow 
the field associated with the drop-dow to accept user data?  Such 
as a case where the provided drop-down contents does not contain 
the value the user needs to enter.   Of course it would be useful 
to also store that item into the drop-down for future reference, 
which is easily done dynamically by populating the drop-down with 
any value recorded in that field in the data file.

I'm not really sure what you should use there, because it seems to 
me that rebol always reduces ^" to ", unless you enter them by hand.

Yes, on a particular field I want to control what the user can and 
can't enter

Hi all, can anyone at RT outline the widget(controls) that WILL be 
available in VID3. Perhaps enter them as outlines in the VID User 
Guide?

From my point of view If anything is inconsistent it seems to be 
when Rebol evalutes blocks.


If you enter a block in the console, it doesn't get evaluated but 
other values do.

>> [1]

== [1]

>> a: 
1
== 1

The block [1] was not evaluted, the word a was.


Though without this possible inconsistency using blocks would be 
a real pain.

mhinson, have you tried running that line of code? Have you noticed 
that everytime you type something and press enter in the field, the 
contents is printed in the console?

One pist could be to systimatically clone itch widget having them 
in two ways the first one would be a redered form based on face the 
other one would be based on field and will have stricly the same 
setting than it twin  If the rendered widget recive a mouse down 
even then we substituate the redered widget base on face by it's 
clone base on field  once this last receive a key  enter  event type 
we affect the clone content to the redered widget .... But with this 
system pref will be verry slow !!! and memory consumsion will be 
twice important ...

I'm getting the following message using pdf-maker:


** Script Error: pick expected index argument of type: number logic 
pair
** Where: emit-space
** Near: if k: select/case pick kern

** Press enter to quit...** Script Error: pick expected index argument 
of type: number logic pair
** Where: emit-space
** Near: if k: select/case pick kern
** Press enter to quit...

Can anyone tell me what I am doing wrong?

graphic commands such as image are separate from text commands. inside 
a text "context", you can use box or vbox to enter a graphic "context". 
(also, you don't need the compose, as the dialect will try to evaluate 
arguments anyway.)

So:

    textbox 10 10 100 100 [
        box [image 0 0 40 40 load %247logo.png]
    ]


The difference between BOX and VBOX is that the former is treated 
like a character, while the latter is treated like a paragraph. (So 
you can have the former in the middle of a text line.)

OOPS! didn't mean to hit ENTER. sorry. Anyway, there used to be a 
test site at http://powerofq.com- it is no longer available, I believe 
that the test module was 'mysqlprot. are those resources still available?

(type the chars you want to see the encoding for, then enter, then 
CTRL-D)

Depending on the Linux distro, there are several startup files executed 
by the shell where you can enter them

I had a go at it again with Gabriele's way of doing it. So far I 
can only intercept input and output when enter is pressed, not at 
individual key presses. I think I can only open system/ports/input 
in lines mode, the same as the default. From memory, now, I seem 
to remember somebody having a go at this and arriving at the same 
point. (Can anybody verify that?)

Yeah, I hit enter and nothing happened, so I thought it was stuck. 
Looks like it was just busy doing something in the background and 
queueing up my enters.

I prefer enabling the little pencil. That moves sending to Ctrl-S 
and allows you to enter multiple lines of text.

Hi, need an advice. I am setting up very simple CGI, and I use ClearOS, 
and CZ installation. But one of CGI scripts seems to be in UTF-8 
or so, and I think error I am getting has nothing in common with 
Apache or its config. When I press enter on the file in Midnight 
Commander, I get following error (the text is my english translation, 
no exact wording):


./test.cgi: line 1: #!/usr/local/rebol-sdk-cmd/bin/rebol: not 
a file nor a directory


It seems like file is containing an unicode BOM marker at the very 
beginning, so even shebang line can't be interpreted? How can I solve 
it, apart from converting file into some CZ compatible charset?

When I have setup a portforwarding via SSH, how can I get rid of 
it?


Close the SSH session or, if using OpenSSH, use ~C to enter the client's 
command-line and remove the (remote) forwarding with -KR<port>. You 
can't remove local forwardings this way, afaik.

The only files that are visible to the shell are the ones in PATH. 
once they are visible to PATH, you can enter them directly. I'm thinking 
this is for security reasons to avoid replacing shell commands with 
malicious executables.

Hi ... I have following task to acomplish ..... my friend who is 
doing college in archeology, is working on her thesis. Part of the 
thesis are images of various ancient goods. So we've got photos from 
our digital camera. I will produce small View script, which will 
allow her to enter comments for each image. Now I want to do a template 
(table?), with various layouts, mainly two images per A4 page plus 
comments under each of those images. Can I influence table cell size? 
My past experience was, that the cell got resized according to image. 
Are there also various methods, how to "stretch" the image in cell? 
thanks a lot for pointers ...

Visit  http://www.TGD-Consulting.de/Download.htmland take a look 
at

the final release of Hex-It!. (I posted on behalf of Dirk Weyand, 
since he cannot reach AltME)


Hex-It! is a small but powerful hex-editor. You can use this tool 
to analyse
or alter the "fingerprints" for any kind of files.

Known first as a contribution to the REBOL Demo 2006 contest, the 
final
release with enhanced features is available now.
Features of Hex-It! v1.2.0:
---------------------------
* cross platform hex-editor

* free "save-feature" for small files sized lesser 15 KB, to edit 
larger
  files purchase a license-key that unlocks this limitation
* enhanced spot navigation with mouse scroll-wheel support
* non blocking file access 

* support of large files (a maximum chunk of 1MB file-data is only 
held in
  memory at once)
Some notes and useful tips & tricks on the usage of Hex-It!:
------------------------------------------------------------

- Modifications of files were automatically saved on exit, if you 
load

another file or if a different chunk of the same file is selected.
- Byte selection:

  + Select a byte with a left mouse button (LMB) click on the hexadecimal
    values to the left. The byte is highlighted then.

  + If a byte is selected, either use the cursor keys or the scroll-wheel 
  of
    the mouse to scroll through the bytes of the file.

  + Change a selected byte with plus (+) & minus (-) or just enter 
  its

    new value. Single characters, three digit numbers or single hexadecimal
    values are valid.

  + Use the right mouse button (RMB) to deselect a highlighted byte.
- Spot-navigation:

  + The spot specifies the index/position of a byte in the file. If 
  no byte

    is selected it shows the position of the top left byte displayed. 
  + Enter a number to set directly the spot to a byte-position.

  + Skip a certain amount of bytes relative to the current spot by 
  using

    plus (+) & minus (-), e.g. "+10000" skips 10000 bytes forward and
    "-1000" skips 1000 bytes backwards. 

  + Skip to end of file: Click with the RMB on the arrow-down Spot-button
    or use the "End"-Key.

  + Skip to first byte of file: Click with the RMB on the arrow-up
    Spot-button or use the "Home"-Key. 
- Seek:
  + ASCII- or Hex-Strings are valid queries.

  + LMB click on the "Seek"-button seeks from the current position.

  + RMB click on the "Seek"-button seeks from the beginning of the 
  file.

Please note, that the license of this release is not BSD like anymore.

It's easy, I just hit enter and watch the times:-)

But in View it works fine:

Type desktop to start the Viewtop.

>> web-file: info? ftp://user:[pass-:-ftp-:-bible-way-:-org]/www/turk/backup/enter-data.exe
connecting to: ftp.bible-way.org
>> probe web-file
make object! [
    size: 626343
    date: 3-Mar-2006/11:37
    type: 'file
]
>>

** Near: info? ftp://user:[pass-:-ftp-:-bible-way-:-org]/www/turk/backup/enter-data.exe
** Press enter to quit..

Set-Net not provided.
** Script Error: stylize has no value
** Near: stylize [
    wmtxt: text "Test" 255.255.0 font-size 16
    wtext: text " " 640 as-is no-wrap black white
    box: box...
** Press enter to quit...

The main problem I have with the SDK is that it makes it harder to 
find bugs. Does anyone have any idea what is causing this error message:

** Script Error: bind expected known-word argument of type: word
** Near: ctx-text: context bind ctx-text system/view
** Press enter to quit...

yes, pressing enter under the linux midnight commander runs cgi in 
console. I just can't get it to work from browser, but that might 
be another problem ...

By symlink, he means symbolic link. Enter "man ls" on your Linux 
command line without the quotes for more info.

Oldes, I have to eat some words. 2.6.2 encaps the script. But when 
I run the encapped script I get this error message:

Misplaced item: "imanXw"
** Script Error: Cannot use path on word!
value
** Near: insert tail funds fb/1
** Press enter to quit...

If I encap with 2.6.2, including %view.r also from 2.6.2 the script 
does not run, but instantly gives this error message:

** Script Error: exchange-rate has no valu
e
** Where: switch
** Near: forall args [
    val: first args
    switch/default type?/word val [
        pair! [append pairs val]
        integer...
** Press enter to quit...

I'm puzzled here. I added litterally, a few lines of ordinary code 
in a piece of functioning code and now when encapping it and running 
it, I get:

** Syntax Error: Missing ( at end-of-paren
** Near: (line 1) x��|�r�Ȓ�z�)^�Dww`i�m�%K��:�4!(
** Press enter to quit...


I could be missing something simple (tired, but has to be working 
tomorrow). The length also changes, but that could be the internal 
build number for the program incrementing.

kib, you can also use the Viewtop to let others run your programs, 
but with adding your site under Public/Sites/. If you click the "Goto" 
menu button, you can enter an URL for an index.r file, you have somewhere 
on the internet. And from there launch your programs.

** Script Error: Cannot use path on none! value
** Where: insert-event-func
** Near: insert system/view/screen-face/feel/event-funcs :funct
:funct
** Press enter to quit...

Getting an error on an ecapped script...works fine as script though:

** Script Error: base-effect has no value
** Where: do-facets
** Near: base-effect
** Press enter to quit...

Sounds like I'm missing an include but I have:
#INCLUDE %"../../../rebol-sdk-276/source/mezz.r"
#INCLUDE %"../../../rebol-sdk-276/source/prot.r"
#INCLUDE %"../../../rebol-sdk-276/source/view.r"
and just in case I tried adding:
#INCLUDE %"../../../rebol-sdk-276/source/gfx-colors.r"
#INCLUDE %"../../../rebol-sdk-276/source/gfx-funcs.r"

It crashes when I request-dir

Anybody know a workaround for this?

from rebcmdview.exe and/or old desktop:

REBOL []
print length? read/lines http://www.google.com	;; works
print length? read/lines http://www.rebol.com	;; works
print length? read/lines https://www.google.com	;; works
halt

11
242
11

encapsulate (encmdface.exe) above and run the exe:

11
242
** Access Error: Invalid port spec: https://www.google.com
** Near: print length? read/lines https://www.google.com
halt
** Press enter to quit...

happens on any https page

** Script Error: Cannot use path on none! value
** Where: insert-event-func
** Near: insert system/view/screen-face/feel/event-funcs :funct
:funct
** Press enter to quit...

Hi guys, I have a question. I'm trying to use the Windows SDK with 
Wine on a linux computer. I get the following error message: "***ERROR 
(enter-data.r): File not found: /home/lat/r/sdk-w/mezz.r".  But that 
is the correct path to the file. So what is wrong?

as for more complex styles - they need to work. I can imagine even 
"focus nesting". Imagine few fields, grid and buttons on screen. 
You e.g. press arrow down to move to next fields, and once you reach 
grid, I would like e.g. by pressing enter, the focus to be treated 
in terms of the grid, so that arrows, page-up, down, etc. work in 
terms of grid only ... ESC would "break" and return focus to "global" 
level, etc.

for example Image I'm a commercial I need to set for tomorow a schedule 
with some client what would be grphically better for me ? click add 
button and then select the date user request date or Click Add button 
then use spinner to select the proper date and time and enter an 
entry to the topic field :)

As long as it can be fixed.  I have a screen I want the user to enter 
the password twice :)

do %rebgui.r
display "RebGuiTest" compose/deep/only [
        label "Query" t: text 40 "" return
		a: area 100x50 "In the beginning, "
        button "Insert" [
				insert a/text "Title{}"
				; edit-text a enter

    insert tail a/text "And from a barely documented VID, a need for 
    something bare but easy to document: RebGui.  And the user saw it 
    was good."
				; edit-text a enter
				show a
        ]

do [at face/pane/3/text 10 insert tail face/pane/3/text "there was 
View 1.3.  "]
] ; End Display
do-events

How to move the cursor to inside the brackets of Title{->Here<-}.

How to enter a newline, and more generally use the function defined 
in rebgui-edit.r into the area?
** Script Error: edit-text has no value
** Where: action
** Near: edit-text a enter

More generally, how to enter a string and move the cursor after the 
insertion of it.  Thanks for an answer to this 'II am New' question 
pertaining to RebGui.

** Script Error: white has no value
** Where: context
** Near: edit: white
over: gold
menu:
** Press enter to quit...

Error message when running tour.r with the new encap.

next error .. got the splash screen now, and then this

** Script Error: Cannot use path on word! value
** Where: init
** Near: effect/4: size - image/size
** Press enter to quit...

** Script Error: focus expected face argument of type: object
** Where: switch
** Near: focus f
if f/type =
** Press enter to quit...

** Script Error: Cannot use path on none! value
** Where: edit-text

** Near: if all [tmp/x < 0 tmp2/x < 0] [face/para/scroll/x: tmp2/x 
- tmp/x]
tmp3:
** Press enter to quit...

on tabbing out of an edit box.

Try this:


 field [show-text face now/time/precise]	; press enter in the field

display "" [ group-box 60x20 "Test" data [ a: field 40 [ show-focus 
f]] return group-box 60x20 "Test2" data
[ f: field 40 ]] do-events
** Script Error: Cannot use path on none! value
** Where: edit-text

** Near: if all [tmp/x < 0 tmp2/x < 0] [face/para/scroll/x: tmp2/x 
- tmp/x]
tmp3:


After typing a few times in the top field, and then hitting enter, 
the error above can occur.

Yep, that works.  Thanks.  I am trying to provide field level data 
validation so do need actions to fire on tab as well as on enter.

display "" [ group-box 60x20 "Test" data [ a: field 40 [ show-focus 
f]] return group-box 60x20 "Test2" data
[ f: field 40 ]] do-events


type abcd in the top field, hit enter.  Type abc in the bottom field, 
and hit enter.  Then hilite all the chars in the top field, enter 
a single character, and hit enter.  

** Script Error: Cannot use path on none! value
** Where: edit-text

** Near: if all [tmp/x < 0 tmp2/x < 0] [face/para/scroll/x: tmp2/x 
- tmp/x]
tmp3:
>>

This is version 3.6

Back in old DOS days, with tools we worked with, we had following 
available:


1) VTG (Variable To Get) function - you could specify VTG$("AB"), 
and user was able to only enter A or B letter, nothing more - we 
used it to limit letters for floppy disk access


2) we had system of field-masks .... e.g. tel-number: (999) - 999 
999 - then all non num chars were displayed in field, you could not 
delete them, they were skipped, and you was only able to write numbers 
.... if you wanted to allow chars, you used "X" insted of "9". Pretty 
powerfull concept - not too much complicated, and allowing you to 
limit bugs ppl can enter ...

One of the most difficult fields was date entry field 99.99.9999, 
with VO we had three or more implementations. Native one pretty sucked 
- it is all about what chars you allow, what happens if you press 
tab, del, how is field hilighted by default, what part is hilighted, 
if your backspace key deleting letters stops at dot or not etc ec. 
With date field - do you want to allow user to enter any number? 
67 or other number is surely not a good day-number, is it? :-) Now 
do you want to disallow user to type nonsense directly? How do you 
know without linking it to calendar? Or do you do your validation 
when leaving your field? Some ppl do validation once per form, e.g. 
when you try to press "Save" button (not my preferred way, at least 
for some field-types, but some do prefer that) ...

Note the following user-configurable blocks under ctx-rebgui/edit:

	tabbed: [area field edit-list password button]

	hilight-on-focus: [field edit-list]

	caret-on-focus: [area field edit-list password]

	action-on-enter: [field edit-list password]


But its probably a good idea to agree on the "correct" default behaviour 
anyway.

and also, if <enter> in middle of editing text, cursor goes to end

and if editing text, and text wraps, then enter a space, cursor jumps 
to end.

Yep. Most hotspots certainly in the UK cost money, often quite a 
lot. That includes Starbucks.

On the other hand, there are a lot of unprotected networks....Not 
that I'd want to enter a password while using one.

This is of great importance for me to.... There are three alphabets 
in use in my county... Whitout these characters I can not enter any 
name properly into database and can not print forms required by law... 
There are ways around it offcourse.. but I want r3 so badly :)

Not yet a linux release, as cursor management under the linux console 
would no longer be handled by the GNU tools for that. I don't remember 
the details, but it is seriously not fun to use, when you can only 
enter text and not use the cursor at all..

Gee... if the mirror gets stuck in place .. we enter a new ice age 
instead.

rebol [
	purpose: "Demonstrate how to use the findany function."
	note:  {This is a function I would like included in Rebol3.
		One of you experts (I don't remember who) made this function 

                for me, and I use it all the time. Do you see any ways it can
		be improved before I submit it? --- Louis
	}
]

s: "findany will return true if it finds in this sentence any of 
the strings you enter in the request box."
print [s newline]

forever [

 bs: copy parse (request-text/title "Enter the strings you want to 
 find separated by a space.") none

	findany: func [ 
	     "Searches string x for any substring found in block ys."
	     x [string!] "string"
	     ys [block!] "block of substrings"
	    /local pos
	] [
	    foreach y ys [
	         if pos: find x y [return pos]
	     ]
	]

either findany s bs [print true][print false]

]
halt

rebol [
	purpose: "Demonstrate how to use the findall function."
	note:  {This is a function I would like included in Rebol3.
		This is my function. Do you see any ways it can
		be improved before I submit it? --- Louis}
]

s: "findall will return true only if it finds in this sentence all 
the strings you enter in the request box."
print [s newline]

forever [

 bs: copy parse (request-text/title "Enter the strings you want to 
 find separated by a space.") none

	findall: func [
		"Seaches string s for all substrings find in block bs."
		s [string!] "string to search in"
		bs [block!] "block of strings to search for"
	][
		findit: func [
			s [string!] "string to search in"
		        b [string!] "string to search for" 
		][
			if find s b [either find s b [true][false]]
		]
		foreach b bs [either findit s b [true][break/return false]]
	]

either findall s bs [print true][print false]

]
halt

Ingo, but Max suggestions doesn't use parens. Just a refinement. 
Also in rebol parens escabe the interpreter and re-enter it. Slowing 
execution. I don't think see as a good fit.

Don't need it, if I press ENTER in an editor on Linux I get just 
a linefeed :-)

It was discussed many times. I would use javascript to hide (enter) 
the form. It so easy. Just use document.write("<input name='submit' 
value='submit' type='submit'>"); where the input is as pure html. 
Better as external javascript. so the spambot parser does not see 
it without js evaluation (which are most such a spambots)

I have a very easy trick that works for preventing spam in forms 
but it needs aiax, no captcha, nothing to enter, ping me if interested

Dockimbel - I can have my private hosting for something like 10�/month, 
but surely not server. At least not here. And - it is not proper 
answer - sometimes you just want to deploy, not enter into new agreement 
with new server hosting house. That is upon client, not mine decision, 
etc.

demographics and import them into the database.


This is now saving this user from having to manually enter them ... 
there being no bridge from the mainframe database.

just one detail idea for improvement .. when you intercept redirection 
in debug mode you can use javascript to set focus on the link to 
continue already so developer just presses space or enter and it 
continues. No need to leave keyboard for mouse or to press tab tab 
tab .. enter :)  
document.getElementById('java2s').focus()