World: r3wp

but if it keeps happening .. you might want to see how clean your 
power is .. and invest in surge protectors

The universe *is* against me.  Don't try to suggest otherwise...

I wasn't around when the outage happened.  It was plugged into a 
surge protector.  However, the power supply is around 6 years old 
and the fan quit late last year.

Any potential employers will note your paranoia on this public web 
forum ...

Gee....

Good thing I'm 'Christopher' professionally...

Oops...

:)

: )

The universe *is* against me.  Don't try to suggest otherwise...
 - I believe  

And

I'm on the hit list too...

Perhaps I can offer an alternative to that universe question?  I 
personally know the guy who made it.  : ) C'mon guys, I couldn't 
resist. 

OK, back to hardware.

And I know the guy who made the guy who made the universe

Wow, you're all set then.

Oh, that's not a guy! "Behind every important man is a woman."

Ah, maybe that's why the universe is against them. : )

:-)

Ok, pulled out the brick and cables.  It appears to be 250W ATX/ATX12V 
with a 20-pin connector, 5 peripheral (Molex?) connectors and 2 floppy 
connectors.

When looking for a replacement, can I ignore the ATX and just go 
for ATX12V?  Or one with a 20+4pin connector?  I'm thinking 400-500W.

(I hate shopping around for this kind of stuff)

If you purchase a ATX 2 power supply with 24 pin power connector, 
ask them to give you a free adaptor to turn it into 20 pins.  The 
ATX 2 power supplies normally have cables for SATA hard drives

Is that ATX1V 2.0?

ATX12V 2.0

I just know it as ATX 2.0

Are these very fast speeds for %server-speed.r :

Console:   0:00:00.672 - 753 KC/S
Processor: 0:00:00.25 - 3456 RHz (REBOL-Hertz)
Memory:    0:00:00.625 - 76 MB/S
Disk/File: 0:00:00.172 - 177 MB/S

I think that's pretty good

It's considerable better than REBOL.org -- which runs on the original 
8086 chip as far as I can tell :-)
Console: 0:00:00.11134 - 4546 KC/S 
Processor: 0:00:00.704108 - 1227 RHz (REBOL-Hertz) 
Memory: 0:00:03.0809 - 15 MB/S 
Disk/File: 0:00:09.183468 - 3 MB/S

Those are good numbers for a current machine Louis.

Henrik, Sunanda, Gregg, Thanks for the feedback!

By the way... Is there anybody outthere that has a Hardware device 
that runs with rebol?.. I like a Hardware device.. that talks and 
uses Rebol.. I want to program that thing to do in Rebol what i want 
it to do... Because im very Jalous at these guys at Processing "http://hardware.processing.org/"..its
JAVA oke.. but If I want my Home-Robot to do a job for me I would 
like to say that in Rebol rather than in Java or C... ;-)

I just want my Home microwave to say to me "** Script Error: I have 
no power yet or was it jet?

Like the HP Calculators.. they where so famous on their programming 
that people went crazy back then... (And that was only in Basic or 
C)..

I want to visit a Cash-Machine and "not" see the blue screen of dead 
but "Please call Carl, init.r is missing"..

In 100% a electronics but it should be possible to create a Hardware-Gadget 
that has rebol inside without theneed of a VM..

Rebolint - don't worry, with R3 architecture, those things you describe 
are - inevitable. I am sorry for guys who were not with us from the 
very beginning, as they will be jealous to hear all the stories of 
pre version 3.0 era :-)

;-)

Anyone, who has bought a Playstation3? Any good games? Tried to install 
Linux on it? I've played Motorstorm and Oblivion at my nephews place. 
Good experience! :-)

a ps3 with linux is something that i want to eventually try... (well, 
a ps3 with rebol/os would be better, but...)

I would not mind have the linux kernel with a rebol dektop running 
over it :-)

Consoles dont need that much drivers. Could be a nice target for 
an own os. But i guess coding at the game-level will cost lots of 
money.

Yes, my son just installed Yellow Dog.

What's your impression? Do you have prior experience with Linux to 
compare it with? How is performance compared to a PC with/without 
hardware accelerated graphics?

Well, I don't have much experience with Linux so I wouldn't be able 
to judge but it works so that is a start. I don't think that it is 
optimized to take advantage of the graphics HW but I could be wrong. 
We have 1080p projector so seeing a 12 foot wide browser is pretty 
cool. I've pretty much decided that it will be my next "Amiga" as 
a couple of guys at work now have PS3's. I just bought some parts 
for a new PC Build but the next comp will be a PS3. Apparently they 
are coming out with a better Cell chip.

Just got a Playstation 3. The experience so far reminds me much of 
when I bought my first Amiga, an A500 back in 1987. Let's see, if 
I'm as hooked in the next days and weeks as I was back then.

Geomol, will you be able to play Mass Effect and Halo 3 on it? :-)

Probably not. :-)

Favorite setup configs; hardware recommendations; what hasn't worked 
for you.

My current machine is 3.5 years old, and is starting to breathe heavily 
at times, and take little naps when it chooses. It's time to think 
about the future.

This setup will be for software development and remote administration. 
It can be a big box, but I'm not opposed to docking a small machine, 
as long as I can use a good monitor and my ergo-keyboard.


What are your favorite setup configs? Have multiple monitors helped 
you? Lots of disk space? An in-house NAS? etc. On the software side, 
what general infrastructure bits do you use? I like Reichart's drive 
model, and have used it very well with Ghost and Partition Magic, 
but haven't gone to PGP or TrueCrypt (yet).


Hardware wise, after setting up a machine with a fast SAS drive, 
man, that's appealing, but expensive. What kind of KVM do you like, 
or do you avoid them (my epxerience is mixed)? Do you like separate 
machines or VMWare? Do you like a Mac base, and emulation, or a real 
Windows machine? Any converts from Win to *nix? Build your own, or 
who do you like these days? Plain Jane, or something special like 
they build for traders? Silent PC? Mini?

What have you tried that didn't work out?


Space is not an issue. I have a huge old surplus desk that will hold 
anything.

My Mac iBook is the best machine, I've bought in more than a decade. 
I've used it daily for more than 2 years without any problems at 
all. I plan to get a Mac Mini and a flat HD monitor in the near future. 
I hope to have better Mac support for REBOL with R3. I find, that 
I get more work done with a Mac, because it just works. When I have 
to use Windows, I use Remote Desktop Connection from my Mac to a 
Win machine at work.

I still use 1.8GHZ Athlon machine, I have ability to use 2 notebooks, 
or other hw. The main trouble for me is noise. When I come home, 
in the evening, I would prefer silent pc. So, even my current set-up 
has some Arctic Cooling Silent Pro CPU cooler and my gfx card is 
fan free. I also bought power supply with big 12cm fan, as fanless 
(passive is quite expensive). If you want to silent your pc, go and 
read some sites, as:

-  www.silentpcreview.com
- www.mini-itx.com
- www.epiacenter.de


IMO nowadays you need all those fancy DualCore CPUs only if you do 
some CPU crunching intensive work, e.g. video, sound editing, etc. 
Other than that, I can bet your PC is pretty much overspecced. I 
remember doing fine with Duron750, with enough of memory and windowsXP. 
If your PC starts lagging, then just reinstall XP from scratch ...


I will live with my current set-up for another one - two years, and 
then I plan on completly silent PC, maybe even without HD, with gigabit 
local network plus wi-fi around the house.  I will combine it with 
some new hi-fi set-up, as my Technics set-up starts to be a bit aged 
(12 years) ...