World: r4wp

Thanks for getting back to me on this Doc...
So if i have this correct, I should:
1. Use the latest version from Cheyenne (have made a copy)

2. Remove all services and protocols from the %services/ and %protocols/ 
folders, except for task-master.r (which i need!)

3. Now hopelessly confused - the UniServe directory tree of the latest 
Cheyenne version I have is as follows:
     Uniserve
     ---clients
     ---libs
     ---protocols
     ---services
         ---task-master.r
         ---task-master
             ---task-handler.r
     I don't see a %UniServe/handlers folder...

You have to add it back, it has been moved to %cheyenne/ folder.

ah - ok. i was trying to create a %MODULES folder
give me a minute...

After removing all unnecessary UniServe plugins, this sequence works 
for me:

    uniserve-path: %//dev/cheyenne-server/uniserve/
    do uniserve-path/uni-engine.r
    uniserve/boot

uniserve/boot works fine after these steps, but...

** Script Error: Cannot use path on none! value
** Where: process-task
** Near: if any [
    zero? shared/pool-max
    shared/pool-max > shared/pool-count
] [fork]
either

(am on windows)

am using the same test i put into altme for the service and module...

Can you send me a zip of your Uniserve folder so I can test that 
locally?

sure

unfortunately, i dont have permissions to send files over altme. 
:(
how else can i send? email?

have sent you a mail at nr at red-lang dot org

Ok, from the UniServe folder, this code works:

    uniserve-path: %./
    do %uni-engine.r
    uniserve/boot

I had to change your absolute path in %reminder.r to:

- line 11:   do uniserve-path/libs/scheduler.r
- line 24:   feeds: load uniserve-path/docs/feeds.r

trying this right now...

damn! no luck.

>> ls
BSD-License.txt  change-log.txt   clients/         docs/
handlers/        libs/            protocols/       services/
uni-engine.r
>> uniserve-path: %./
== %./
>> do %uni-engine.r
Script: "UniServe kernel" (17-Jan-2010)
Script: "Encap virtual filesystem" (21-Sep-2009)
== true
>> uniserve/boot
booya
.

http://newsrss.bbc.co.uk/rss/newsonline_uk_edition/business/rss.xml
** Script Error: Cannot use path on none! value
** Where: process-task
** Near: if any [
    zero? shared/pool-max
    shared/pool-max > shared/pool-count
] [fork]
either

Ah, I stopped at "booya". :-)

:)
is this because pool-list is empty?

i put in a debug "print" cmd in the on-new-client function of task-master.r, 
which is the only place i could see pool-list being appended to...but 
it seems the function is not called

on-new-client: has [job][
  ;added this line
  print client/remote-ip
  if client/remote-ip <> 127.0.0.1 [close-client exit]
  set-modes client [keep-alive: on]
  client/timeout: 15
  client/user-data: make task []
  ;only place where pool-list is appended to...
  append pool-list :client

No the issue is with 'shared being reset to 'none in %task-master...looks 
like a regression in Uniserve when working on standalone...I'm looking 
into it.

thanks doc!

In %reminder.r, you shouldn't use: scheduler/wait. Uniserve is already 
providing an event loop. You need to remove that line.

ok...

removed the scheduler/wait line...now:

uniserve-path: %./
== %./
>> do %uni-engine.r
Script: "UniServe kernel" (17-Jan-2010)
Script: "Encap virtual filesystem" (21-Sep-2009)
== true
>> uniserve/boot
booya
** Script Error: Invalid path value: server-ports
** Where: reform
** Near: mold any [uniserve/shared/server-ports port-id]
>>

I've just pushed a fix for that to Cheyenne SVN repo on Google code.

thanks doc...downloading now...

From that, it seems to work until the job event is raised, then the 
server crashes (not sure if it's your code, scheduler or Uniserve 
that causes that).

:(
i'm actually trying to do something really simple
i have a bunch of feeds i want to download

i can do that sequentially (foreach feed feeds [...]), but thought 
it best to us background worker processes via task-master to download 
instead
is there an alternative?

or a better way of writing this using uniserve?

this is what i get with the latest from googlecode:

uniserve-path: %./
== %./
>> do %uni-engine.r
Script: "UniServe kernel" (17-Jan-2010)
Script: "Encap virtual filesystem" (21-Sep-2009)
== true
>> uniserve/boot
booya

10/10-18:37:48.883-## Error in [uniserve] : Cannot open server reminder 
on port 9000 !

10/10-18:37:48.884-## Error in [uniserve] : Cannot open server task-master 
on port 9799 !
== none
>>

Uniserve task-master is mainly meant for server-side parallel request 
processing. For your need, you should use an async HTTP client rather, 
which would be a much simpler solution.

Cannot open...
 you need to close any previous Uniserve session.

sorry - just killed all previous Uniserve sessions. now get:

uniserve-path: %./
== %./
>> do %uni-engine.r
Script: "UniServe kernel" (17-Jan-2010)
Script: "Encap virtual filesystem" (21-Sep-2009)
== true
>> uniserve/boot
booya
** Script Error: Invalid path value: conf-file
** Where: on-started
** Near: if all [
    uniserve/shared
    file: uniserve/shared/conf-file
] [
    append worker-args reform [" -cf" mold file]
]
>>

Are you running from SVN repo, or a copy of Uniserve folder?

a copy of the Uniserve folder...

This looks like Cheyenne-dependent code...

But, you should *really* use a async HTTP client, that's the best 
solution for your need (multiple HTTP downloads at the same time).

hmmm. ok...will work on this and get back to you
thanks for the time Doc

(cant wait to see Cheyenne on Red ;)

Well, you might see some micro-Cheyenne before Christmas. ;-)

best christmas ever!

just to persist with using uniserve...i think something i may be 
getting there

uniserve-path: %./
== %./
>> do %uni-engine.r
Script: "UniServe kernel" (17-Jan-2010)
Script: "Encap virtual filesystem" (21-Sep-2009)
== true
>> uniserve/boot
booya
127.0.0.1
127.0.0.1
== none
>>

i commented out the lines from on-started:

on-started: has [file][
		worker-args: reform [

   "-worker" mold any [in uniserve/shared 'server-ports port-id]		;TBD: 
   fix shared object issues
		]
		if not encap? [
			append worker-args reform [" -up" mold uniserve-path]
			if value? 'modules-path [
				append worker-args reform [" -mp" mold modules-path]
			]
			if all [
				uniserve/shared
				;file: uniserve/shared/conf-file 
			][		
				;append worker-args reform [" -cf" mold file]
			]
		]
		if integer? shared/pool-start [loop shared/pool-start [fork]]
	]

...since conf-file is cheyenne specific


i think maybe the scheduler is killing UniServe - it exits while 
returning none...

nope - the scheduler is just fine...

i'm now thinking it may have to do with using the shared/do-task 
in the on-load function...

nope
will take doc's advice and do something simpler

If you're using R3 or Red/System, you could use the cURL binding 
in multi-mode

Sujoy: have a look at this description of  one of async HTTP clients 
available: http://stackoverflow.com/questions/1653969/rebol-multitasking-with-async-why-do-i-get-invalid-port-spec

Doc, I reported that problem before remember? we were agreed on the 
fix:

in task-master.r

line 135: if all [ uniserve/shared in uniserve/shared 'conf-file 
file: uniserve/shared/conf-file ][
	 append worker-args reform [" -cf" mold file] ]

and on line 123: all [ in uniserve/shared 'server-ports uniserve/shared/server-ports 
]


Endo: "without these patches latest UniServe cannot be used alone. 
because it fails to start task-master. Ofcourse I need to remove 
logger, MTA etc. services." - 19-Dec-2011 2:50:29
Dockimbel: "I agree about your changes." - 19-Dec-2011 2:50:56

I think it is the same problem for Sujoy. (better to move Cheyenne 
group)

Thanks Endo...I am still keen on using uniserve - will get there 
eventually!

i have another issue - and need help from a parse guru

i'm trying to extract article text from an awfully written series 
of html pages - one sample:


http://www.business-standard.com/india/news/vadra-/a-little-helpmy-friends//489109/

there are 160 </table> tags!!
worse, article contents are scattered throughout the html mess