World: r3wp

I had a lot of trouble with comments in CureCode today being hex-decoded, 
when I was just trying to refer to a filename %bar.r. I had to write 
it as %25bar.r, every time, even during revisions. Comments shouldn't 
be hex-decoded.

Dehex removed (don't know why it was there).

Tested on ticket #1 (in case you wonder why it popped up in recently 
changed tickets).

That was the reason for all of the revisions to the comment of #1228 
:(

I'm First
Nice !!!

Doc, did you draw your "camembers" with rebol ?

i think so ;-)

Nope, it's Google's Chart API work :-)

http://code.google.com/intl/fr-FR/apis/chart/

Ooooh, what a shame ;-)

If there's was a nice lib in Rebol with a cool dialect to do the 
same job as google's charts...

there was only some work done by Ladislav IIRC, but it was for old 
draw IIRC ...

pie-chart: func [
    con [block!] ;-- block of overriden constants
    cmd [block!] ;-- commands to draw the pie-chart 
    /local push angle middle bottom pane bout sens
    size back-color start line text
][

    ;-- default constants (overridable by con block)
    size: 300x200       ;--size of the box
    back-color: white   ;-- back color of the drawing

    start: -90          ;-- starting angle of the pie chart (in degrees)
    line: [pen gray line]   ;-- draw block used for lines

    text: [pen none fill-pen gray text vectorial]   ;-- draw block used 
    for texts
    ;--
    do bind con 'size
    pane: make block! 30
    push: func [data][append pane compose data]
    center: size / 2    ; -- center of the pie chart
    radius: to-pair divide min size/x size/y 2.5
    sens: true
    bottom: 0 
   
    foreach [title color percent] cmd [
        if issue? color [color: to-tuple debase/base color 16]

        push [pen back-color fill-pen (color) arc center radius (start) (angle: 
        round/ceiling percent * 360) closed]
        middle: angle / 2 + start
        push line 
        push [

            (center + as-pair radius/x * cosine middle radius/x * sine middle)

            (bout: center + as-pair radius/x + 3 * cosine middle radius/x + 3 
            * sine middle)
        ]
        either 0 <= cosine middle [
            unless sens [bottom: 0 send: true]
            push reduce [
                bout: as-pair center/x + radius/x bout/y
                bout: as-pair bout/x + 8 max bout/y bottom
                bout: as-pair bout/x + 3 bout/y
            ]
            bottom: bout/y + 12
        ][
            if sens [bottom: size/y sens: false]
            push reduce [
                bout: as-pair center/x - radius/x bout/y
                bout: as-pair bout/x - 8 min bout/y bottom
                bout: as-pair bout/x - 3 bout/y
            ]
            bottom: bout/y - 12
            bout: as-pair bout/x - first size-text make face [
                size: 5000x5000
                text: title
            ] bout/y 
        ]
        push text 
        push [(bout + 1x-8 ) (title)]
        start: start + angle
    ] 
    pane
]

Not perfect but it give results.

pie: pie-chart [
    size: 300x200
    start: -80
][
    "block" none 0
    "crash" #ff3030 .04
    "major" #ff6060 .09
    "minor" #ffb850 .44
    "tweak" #ffd850 .03
    "text" #ffd850 .02
    "trivial" #ffd8a0 .31
    "not a bug" pewter .06
]

view layout [
    box 300x200 white effect [draw pie]
]

because of the vectorial text i use, it's not usable everywhere...

it can be replaced by non vectorial text but in that case, the drawing 
can't be translated or scaled

Nice result, you should publish it on rebol.org.

CureCode/R3 is on a linux server. I guess there are font issues?

it could be bypassed...

unless sens [bottom: 0 send: true] <= typo in "send:"?

try this on linux...

pie: pie-chart [
    size: 300x200
    start: -80
    text: [pen gray text ]
][
    "block" none 0
    "crash" #ff3030 .04
    "major" #ff6060 .09
    "minor" #ffb850 .44
    "tweak" #ffd850 .03
    "text" #ffd850 .02
    "trivial" #ffd8a0 .31
    "not a bug" pewter .06
]

view layout [
    box 300x200 white effect [draw pie]
]

yes typo

If you can add barcharts too, that would be nice.

I think that Carl would be interested in such a library.

He asked me once for one that can draw pie and bar charts such as 
those from google.

I think that he would be seduced by the small size and elegancy of 
your code.

it's a first thought, could be optimized i guess...

Linux (Ubuntu 8.04 under Vmware) : 
- 1st version: drawing ok, but no text

- 2nd version: no pie chart, no text, only 1 line (first one in list 
maybe)

hum...

you tested with R2 ?

would you an R3 version better ?

R2 only. I can't use R3 for my projects.

New version, i build images from texts, it should work on linux as 
well.
And you can change the font used as well.

pie-chart: func [
    con [block!] ;-- block of overriden constants
    cmd [block!] ;-- commands to draw the pie-chart 
    /local push angle middle bottom pane bout sens
    size back-color start line text font* font
][

    ;-- default constants (overridable by con block)
    size: 300x200       ;--size of the box
    back-color: white   ;-- back color of the pie
	font: make face/font [color: gray size: 12]

    start: -90          	;-- starting angle of the pie chart (in degrees)
    line: [pen gray line]   ;-- draw block used for lines
    ;--
    do bind con 'size
    font/offset: 0x0
    pane: make block! 30
    push: func [data][append pane compose data]
    center: size / 2    ; -- center of the pie chart
    radius: to-pair divide min size/x size/y 2.5
    sens: true
    bottom: 0 
   	font*: font
    foreach [title color percent] cmd [
        if issue? color [color: to-tuple debase/base color 16]

        push [pen back-color fill-pen (color) arc center radius (start) (angle: 
        round/ceiling percent * 360) closed]
        middle: angle / 2 + start
        push line
        push [

            (center + as-pair radius/x * cosine middle radius/x * sine middle)

            (bout: center + as-pair radius/x + 3 * cosine middle radius/x + 3 
            * sine middle)
        ]
        text: to-image make blank-face [

         size: size-text make face [size: 5000x5000 text: title font: font*]
        	text: title
        	font: font*
        	color: none
        ]
        either 0 <= cosine middle [
            unless sens [bottom: 0 sens: true]
            push reduce [
                bout: as-pair center/x + radius/x bout/y
                bout: as-pair bout/x + 8 max bout/y bottom
                bout: as-pair bout/x + 3 bout/y
            ]
            bottom: bout/y + text/size/y
        ][
            if sens [bottom: size/y sens: false]
            push reduce [
                bout: as-pair center/x - radius/x bout/y
                bout: as-pair bout/x - 8 min bout/y bottom
                bout: as-pair bout/x - 3 bout/y
            ]
            bottom: bout/y - text/size/y
            bout: as-pair bout/x - text/size/x bout/y 
        ]

        push [image (text) (bout + as-pair 1 text/size/y / -2 - 0.5 ) black 
        ]
        start: start + angle
    ] 
    pane
]

pie: pie-chart [
    size: 300x200
    start: -80
    font: make font [size: 10]
][
    "block" none 0
    "crash" #ff3030 .04
    "major" #ff6060 .09
    "minor" #ffb850 .44
    "tweak" #ffd850 .03
    "text" #ffd850 .02
    "trivial" #ffd8a0 .31
    "not a bug" pewter .06
]

view layout [
    box 300x200 white effect [draw pie]
]

It works on Linux. Pie, texts, lines, everything is there.

You should make a library with that code and post it online somewhere 
with short doc/examples (could be rebol.org e.g.).

Getting garbage at the top of the page on every page of CureCode 
- more with each view.

This is on http://curecode.org/rebol3/

It's caused by a missing copy ....

Have to reset Cheyenne ...

The garbage is gzipped data ....

I saw this on my own server a few days ago ...

wow, its getting pretty insane!

I've seen this a lot outside of Curecode. Never figured out what 
it is.

Looks like Cheyenne is trying to create a new form of ASCII art :-). 
First time I see that on Cheyenne. Will reset the server at once.

Worker processes reset, seems back to normal now.

seems there is a copy "" missing somewhere... I could see the last 
page viewed on cheyenne.org just above the curecode page last time 
I visited it.

(or a clear missing)

I'm wondering why this garbage is showing up now instead of a few 
weeks ago when I've upgraded the server.

Henrik ... no idea when you've seen this issue?