"standard" tcp/ip log !?
[1/4] from: media:quazart at: 26-Oct-2001 8:42
Hello world,
I have quoted a text that comes from my cable modem firewall/router. It
states that it can broadcast its log to the default ip address 255...
here is the text directly in the help box:
{The router can send the log messages to the host in LAN side. If you want
to use "LogViewer" to record those log messages, you could execute the
LogViewer on one PC located on LAN side and insert the PC's IP in "Send Log
to". The router will send the log messages to this PC. Otherwise, it will
broadcast those log messages with default ip address 255.}
So, how do I access this stream of data... is this "log message" a standard
protocol? or is it just plain text?
anyone know what to do with this log system (in rebol)?
If its of any importance, its a linksys router
thanks in advance!
-MAx
[2/4] from: martin:middleton:speechworks at: 26-Oct-2001 9:05
There's an application you can load onto your PC that will get the logs
automatically, but I'm assuming you want to read the messages via REBOL.
The 255 address refers to the host address on the subnet your linksys is
using, by default it's referring to 192.168.1.255. This means you have to
set your machine's IP address to this if you want to receive the log
messages. Alternatively, you can reconfigure the router (through your web
browser) to send the logs to another IP address.
I'm not sure what port the logger uses to send data (I'm not near my
linksys at the moment).
HTH
At 08:42 AM 10/26/2001, you wrote:
>Hello world,
> I have quoted a text that comes from my cable modem firewall/router. It
<<quoted lines omitted: 15>>
>[rebol-request--rebol--com] with "unsubscribe" in the
>subject, without the quotes.
- martin
[3/4] from: media::quazart::com at: 26-Oct-2001 11:50
> There's an application you can load onto your PC that will get the logs
> automatically, but I'm assuming you want to read the messages via REBOL.
does it come with the windows distribution or is an 3rd party thing?
> I'm not sure what port the logger uses to send data (I'm not near my
> linksys at the moment).
how can I find out? I thought I might just open the port and see what's
pushed through it... maybe its all ascii !?
thanks!
-MAx
[4/4] from: martin:middleton:speechworks at: 26-Oct-2001 13:10
At 11:50 AM 10/26/2001, you wrote:
> > There's an application you can load onto your PC that will get the logs
> > automatically, but I'm assuming you want to read the messages via REBOL.
>
>does it come with the windows distribution or is an 3rd party thing?
You'll have to download it from the linksys site.
> > I'm not sure what port the logger uses to send data (I'm not near my
> > linksys at the moment).
>
>how can I find out? I thought I might just open the port and see what's
>pushed through it... maybe its all ascii !?
The data gets pushed from the linksys to the viewer. The viewer opens up a
new port above 1000 each time it's started. But I can't tell you what port
it's connecting to on the linksys until I get back to my home network.
>thanks!
>
>-MAx
>
>--
>To unsubscribe from this list, please send an email to
>[rebol-request--rebol--com] with "unsubscribe" in the
>subject, without the quotes.
- martin
Notes
- Quoted lines have been omitted from some messages.
View the message alone to see the lines that have been omitted